Cleaning Efficiency at Different Dilution Ratios: When and Why to Adjust

One of the most flexible aspects of AQUAQUICK 2000 is its ability to be diluted with water for a wide range of cleaning tasks. This not only enhances cost efficiency but also allows users to customize cleaning strength based on the level of contamination, surface type, and application method.

Unlike many chemical cleaners that require full-strength use, AQUAQUICK 2000 can be diluted as much as 1:50 while still remaining effective in light-duty scenarios.

---

💧 How Dilution Affects Cleaning Performance

AQUAQUICK 2000’s effectiveness is tied to the concentration of active surfactants and emulsifiers in the solution. While higher concentrations increase cleaning speed and depth, lower concentrations are ideal for maintenance cleaning and general degreasing.

The cleaner remains chemically stable at all dilutions, meaning there’s no risk of separation, performance drop-off, or pH swings when mixed with clean water.

---

📊 Recommended Dilution Ratios by Use Case

Application Type	Suggested Ratio (AQUAQUICK 2000 : Water)	Notes
Heavy oil sludge removal	1 : 1 to 1 : 3	Use for crude oil, bitumen, engine grime
Machinery degreasing	1 : 3 to 1 : 5	For gears, engines, bearings
Tank or surface cleaning	1 : 5 to 1 : 8	Spray or foam application
Marine deck or hull wash	1 : 5 to 1 : 10	Rinse after scrubbing
Agricultural equipment rinse	1 : 7 to 1 : 10	Safe on paint, rubber, and plastic
Daily maintenance cleaning (light duty)	1 : 10 to 1 : 20	Floors, tools, low-grime areas
Eco-sensitive or greywater zones	1 : 20 to 1 : 50	Minimal environmental impact

---

🧠 Pro Tips for Efficient Dilution Use

• Start stronger, adjust lower: Begin with a 1:5 or 1:10 dilution and adjust based on cleaning results.
• Use warm water when possible (30–40°C) to improve surfactant activity.
• Mix only what you need: For best results, prepare small batches of diluted solution daily.
• Use soft or filtered water: Especially in foaming equipment, to avoid hard water interference.
• Agitation enhances power: Even at high dilution, brushing or scrubbing boosts efficiency.

---

🧪 Chemical Stability After Dilution

• The product remains stable for 24–48 hours after mixing (longer if stored in sealed containers).
• No precipitation or oily separation occurs, thanks to the microemulsion structure.

---

💸 Cost Savings by Dilution

Dilution	Output from 20L Jerry Can	Effective Price per Liter (approx.)
1 : 5	120L	€0.83/liter
1 : 10	220L	€0.45/liter
1 : 20	420L	€0.24/liter
1 : 50	1,020L	€0.10/liter

The more diluted your task allows, the more you extend the product’s value—without sacrificing environmental safety.

---

Conclusion: AQUAQUICK 2000 delivers customizable cleaning strength that adapts to your needs. By learning when and how to adjust dilution ratios, you maximize both performance and cost-efficiency, making this cleaner one of the most versatile tools in your operational toolkit.